A III-nitride nanowire solar cell fabricated using a hybrid coaxial and uniaxial InGaN/GaN multi quantum well...

III-Nitride nanowires are currently considered as next generation photovoltaic materials due to their excellent physical properties together with reduced dislocation densities, increased surface area and thus enhanced light absorption and direct path for carrier transport. Here, we investigate the photovoltaic characteristics of a solar cell fabricated from a novel hybrid nanostructure comprising uniaxial and coaxial InGaN/GaN multi-quantum wells (MQWs) along with an InGaN nano-cap layer. Various characterization methods were employed to study the optical and structural properties of the hybrid nanostructure. Transmission electron microscopy images revealed the hybrid nanostructure consists of distinct uniaxial and coaxial InGaN/GaN MQWs along with the InGaN nano-cap layer. The InGaN/GaN MQW architectures have a significant effect on the performance of the photovoltaic device. The solar cell fabricated with the hybrid nanostructure exhibits superior photovoltaic performance compared to the uniaxial as well as the coaxial InGaN/GaN nanowire MQW structures. The improved photovoltaic characteristic is primarily attributed to the considerably larger InGaN active area grown in the hybrid nanostructure. A conversion efficiency of 1.16% along with a fill factor of 70% was obtained for the device fabricated with the hybrid nanostructure. This study provides an experimental demonstration of the improvement of III-nitride nanowire based solar cells incorporating uniaxial and coaxial InGaN/GaN MQWs.