Enhanced Reflection of GaAs Nanowire Laser Using Short-Period, Symmetric Double Metal Grating Reflectors

Owing to the high contrast of the refractive indices at the end facets of a nanowire, lasing emission can be achieved in an individual nanowire without external, reflected feedback. However, the reflection provided by the end facet is not high enough to lower the threshold gain, especially for nanowires with smaller diameters. This work proposes a novel structure of nanowire laser partially sandwiched in double Ag gratings. Compared to a nanowire with a single metal grating or without a grating, the parallel double metal gratings play the reflector role with higher reflectivity to enhance the round-trip feedback and reduce the threshold gain. The reflective properties are calculated using the finite elements method. Simulation results show that a high reflectivity of more than 90% can be achieved when the number of periods is more than 8. The reflectivity of double gratings is 2.4 times larger than that of the nanowire end facet for large nanowire diameters. When the nanowire has a small diameter of 150 nm, the reflectivity of double gratings is 17 times larger than that of the nanowire end facet. Compared to a single grating, the reflective performance of double gratings is much better. Owing to the highly reflective properties of the double gratings, nanowires partially sandwiched in the double gratings can realize lasing emission at a very low threshold gain, and the period of the grating can be very short to benefit on-chip interconnection systems.