Simultaneous preconcentration and pre-column derivatization for rapid analysis of nitrilotriacetic acid in...

A simplified sample pretreatment procedure was developed for quantitative measurement of nitrilotriacetic acid (NTA) in environmental water. On the basis of coordination capacity between NTA and metal ions, aluminum-based metal organic framework (MOF, MIL-53(Al)) was adopted for the adsorption of NTA, followed by stripping with copper sulfate as the eluent. The adsorbed NTA was converted into Cu-NTA during the desorption process, which facilitated the ensuing measurement by high performance liquid chromatography (HPLC). A linear range within 0.10 - 10 mg L^-1 was achieved, along with a limit of detection (LOD, S/N=3, n=7) of 0.03 mg L^-1 and an enrichment factor of 10.4. The developed method was validated by the analysis of sea water, influent of wastewater treatment plant and industrial wastewater, with satisfactory recoveries (90.2 - 91.1%) obtained.