Analysis of ICNIRP 2020 Basic Restrictions for Localized Radiofrequency Exposure in the Frequency Range above 6 GHz

ICNIRP 2020 guidelines have defined a practical temperature elevation threshold for human health effects, namely the operational adverse health effect threshold that forms the basis of the absorbed power and energy density basic restrictions. These basic restrictions for localized exposures at frequencies above 6 GHz were evaluated by comparing numerically computed temperature rise against the target temperature rise of 2.5 o C, which is the operational adverse health effect threshold divided by the occupational safety factor of 2. The numerical model employs the maximum absorbed power and energy density levels allowed by the occupational basic restriction for both pulsed and continuous wave exposures. These analyses were performed considering 3- and 4-tissue layer models and a variety of beam diameters, frequencies, and exposure durations. The smallest beam diameters were based on a study of theoretically achievable beam widths from half-wave resonant dipoles and show the impact of the averaging area on the computed temperature elevation. The results demonstrated that ICNIRP's assumed occupational safety factors in the frequency range above 6 GHz were not sufficiently maintained for all exposure scenarios and particularly for short pulse exposures at frequencies of 30 GHz or higher with small beam diameters. Worst-case tissue temperature elevations were estimated to be as much as 3.6 times higher than ICNIRP's target temperature increases. Consequently, the authors suggest a small modification in the application of the ICNIRP 2020 localized basic restrictions, thereby limiting the worst-case tissue temperature increases to 1.4 times the target value.