Related Experiment Video
Updated: Sep 21, 2025

Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
Investigation of Strength Properties for Concrete Containing Fine-Rubber Particles Using UPV
Yeol Choi1, Il-Hyun Kim1, Hyeon-Jin Lim2
1School of Architecture, Kyungpook National University, Daegu 41566, Korea.
Abstract:
Since the early 1990s, many studies were conducted to utilize waste tires as a replacement for natural coarse and fine aggregates in concrete, known as rubberized concrete or rubber-concrete. In this paper, an experimental study was performed on the strength properties of concrete containing fine-rubber particles as a replacement of fine aggregate, using destructive and non-destructive tests. Ultrasonic pulse velocity (UPV) tests were used to evaluate the strength property of rubber-concrete as a non-destructive test. Compressive and splitting tensile strengths were determined for four different volume contents of fine-rubber particles and exponential equations were proposed for the relationship between compressive, splitting tensile strength and the UPV of rubber-concrete, respectively. With the limited conditions in this paper, it found that UPV tests could also be used to estimate the compressive and tensile strengths of rubber-concrete, that are used in other types of concrete.
Related Concept Videos
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...
Non-destructive Tests for Concrete Strength
Microcracking in Concrete
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Impact Strength of Concrete
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...

