Related Experiment Video
Updated: Sep 21, 2025

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
Published on: November 20, 2014
A Method for Determining Ultimate Grouting Pressure for Reinforcement of Masonry Arch Dam with Mortar Deterioration:
Jia'ao Yu1,2, Zhenzhong Shen1,2, Liqun Xu1,2
1State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University, Nanjing 210024, China.
Abstract:
The deterioration of mortar has an adverse impact on the deformation and stress state of the masonry arch dam, after freeze-thaw cycles, in long-term operation. The purpose of this paper is to investigate the effect of reinforcement grouting on the stress of a thin masonry arch dam and propose a reasonable grouting method in the case of mortar deterioration. The determination of the ultimate grouting pressure is another main focus. The masonry material was generalized by combining a linear elastic model and the proportional weighted average under the condition of deterioration caused by freeze-thaw cycles. A series of analytical methods were proposed for the research of grouting effect on dam stress, based on which the ultimate grouting pressure is calculated in various cases. Results demonstrate that the dam tensile stress may exceed the allowable value in the following operation. Then, some recommended methods for the grouting layout and the estimation of grouting pressure were put forward by integrating the grouting field test with numerical analysis for reinforcement. The research conclusions might have a guiding significance for the reinforcement of similar projects.
More Related Videos
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
10:00Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
Related Concept Videos
Mortar Joint Deterioration in Masonry
The...
Reinforced Brick Masonry
To fortify brick walls...
Mortar Properties
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Mortar Joints in Brick Masonry
The process of joint tooling is implemented as the mortar begins to harden. This technique involves compacting and shaping the mortar to enhance both the appearance and the...
Masonry in Cold and Hot Weather Conditions
Other key practices include keeping masonry units...