A 78.8-84 GHz Phase Locked Loop Synthesizer for a W-Band Frequency-Hopping FMCW Radar Transceiver in 65 nm CMOS
Related Experiment Video
Updated: Sep 21, 2025

Generation and Coherent Control of Pulsed Quantum Frequency Combs
Published on: June 8, 2018
Van-Son Trinh1, Hyohyun Nam1, Jeong-Moon Song1
1Division of Electronics and Electrical Engineering, Dongguk University, Seoul 04620, Korea.
Abstract:
A W-band integer-N phase-locked loop (PLL) for a frequency hopping frequency modulation continuous wave (FMCW) radar is implemented in 65-nm CMOS technology. The cross-coupled voltage-controlled oscillator (VCO) was designed based on a systematic analysis of the VCO combined with its push-pull buffer to achieve high efficiency and high output power. To provide a frequency hopping functionality without any overhead in the implementation, the center frequency of the VCO is steeply controlled by the gate voltage of the buffer, which effectively modifies the susceptance of the VCO load. A stand-alone VCO with the proposed architecture is fabricated, and it achieves an output power of 13.5 dBm, a peak power efficiency of 9.6%, and a tuning range of 3.5%. The phase noise performance of the VCO is -92.6 dBc/Hz at 1-MHz and -106.1 dBc/Hz at 10 MHz offset. Consisting of a third-order loop filter and a divider chain with a total modulus of 48, the locking range of the implemented PLL with the cross-coupled VCO is recorded from 78.84 GHz to 84 GHz, and its phase noise is -85.2 dBc/Hz at 1-MHz offset.
More Related Videos
Related Concept Videos
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...
Time and frequency -Domain Interpretation of Phase-lead Control
The design of phase-lead control involves the strategic placement of poles and zeros to balance steady-state error and system...
Phase-lead and Phase-lag Controllers
MOSFET Amplifiers
RLC Circuit as a Damped Oscillator
Consider a series RLC circuit. Here, the presence of resistance in the circuit leads to energy loss due to joule heating in the resistance. Therefore, the total electromagnetic energy in the circuit is no longer constant and decreases with time. Since the magnitude of charge, current, and potential difference continuously decreases, their oscillations are said to be damped. This is...
IR Frequency Region: Fingerprint Region

