Self-triggering topology for high-power nanosecond pulse generators based on avalanche transistors Marx bank circuits...

In recent years, several novel avalanche transistor-based power synthesis topologies have been proposed to improve the output performance of pulse generators based on avalanche transistors. The most promising is the topology based on avalanche transistors Marx Bank Circuits (MBCs) and linear transformer driver (LTD). However, it suffers from the same problems as other semiconductor switch-based LTD generators. The greater the number of LTD modules, the higher the requirements for synchronization and drive capability of the trigger system. This paper proposes a new self-triggering topology for pulse generators based on avalanche transistors MBCs and LTD, which significantly simplifies the entire generator's requirement for trigger system synchronization and driving capability. First, the circuit topology and its operation principle are introduced. Then, three prototypes with one trigger LTD module and three self-triggering LTD modules are developed. The output characteristics are experimentally investigated. The results verify the feasibility of the proposed topology. Finally, the output amplitude and the rise time are 3.35 kV/3.7 ns, 4.12 kV/3.7 ns, and 4.88 kV/4.0 ns on a 25 Ω resistive load, respectively. All generators can operate at 1 kHz. The topology proposed in the article maximally simplifies the requirements for synchronization and drive capability of the trigger system for generators based on avalanche transistor MBCs and LTD.