Related Experiment Video
Updated: Sep 7, 2025

Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
Profiling Olefins in Gasoline by Bromination Using GC×GC-TOFMS Followed by Discovery-Based Comparative Analysis
Timothy J Trinklein1, Jiaxin Jiang1, Robert E Synovec1
1Department of Chemistry, University of Washington, Box 351700, Seattle, Washington 98195-1700, United States.
Abstract:
An analytical workflow for the analysis of olefins in gasoline that combines selective bromination and comprehensive two-dimensional (2D) gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) with discovery-based analysis is reported. First, a standard mix containing n-alkanes, 1-alkenes, and aromatic species was brominated and quantified using % reacted as a metric for each compound class, defined as the difference in the total peak area between the brominated and original samples normalized to the original sample. The average % reacted (1 s.d.) values were -1.45% (2.8%) for the alkanes, 99.5% (0.4%) for the alkenes, and 6.7% (11.6%) for the aromatics, demonstrating excellent selectivity toward the alkenes with only minor aromatic bromination. The bromination chemistry was then applied to gasoline, followed by GC×GC-TOFMS analysis of the original and brominated gasoline. This GC×GC-TOFMS data set was then submitted to the supervised discovery tool tile-based F-ratio analysis (FRA), which reduced the large data set to only the chromatographic regions which distinguish between the original and brominated gasoline samples. FRA discovered 314 hits, 56 of which were determined statistically significant using combinatorial null distribution analysis (CNDA), a permutation-based significance test. Since the brominated olefins elute in an uncrowded region of the 2D chromatogram and have no signal in the original sample, their discoverability was greatly increased relative to the original olefins. By combining the information gained from brominated olefin standards and the structured patterns of the GC×GC separations, the top hits were identified as the dibromoalkane products of mono-olefins, with five C5 mono-olefins identified on a species level. The analytical workflow has broad implications for using selective reaction chemistries to facilitate supervised discovery by targeting desired compound classes.
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Branched Alkane Fragmentation
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Mass Spectrometry: Long-Chain Alkane Fragmentation
Mass Spectrometry: Cycloalkane Fragmentation
For example, cyclohexane molecular ions have a mass-to-charge ratio (m/z) of 84, which tends to produce a stronger signal than linear alkanes like hexane. This stability comes from...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...

