Related Experiment Video
Updated: Sep 6, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Adaptive tracking control for stochastic nonlinear systems with time-varying delays using multi-dimensional Taylor
1School of Automation, Southeast University, Nanjing, Jiangsu, China; Key Laboratory of Measurement and Control of Complex Systems of Engineering, Ministry of Education, Nanjing, Jiangsu, China.
Abstract:
For stochastic nonlinear systems (SNSs) perturbed by compound uncertainties, the conventional model-based control approaches assume that the evolution behavior of uncertain variables is known. Unfortunately, such approaches are often conservative for most practical scenarios with the slow convergence speed and unsatisfactory anti-interference performance. For this sake, an adaptive control scheme based on deep deterministic policy gradient (DDPG) and multi-dimensional Taylor network (MTN) is proposed here to address the tracking problem for a category of SNSs subject to fast time-varying uncertainties, stochastic disturbance and unknown time-varying delays. The effect of time delay is embedded in the reproducing kernel Hilbert space through the error coordinate transformation. In the framework of DDPG, the MTN-based surrogate is utilized to construct the online network and target network via the temporal-difference method, which promises more desirable real-time performance due to its concise structure than conventional NN-based surrogates. In order to enhance the robustness of the system under fast time-varying uncertainties, a novel persistent excitation (PE) mechanism is designed to ensure that the control policy is appropriately rewarded or punished. Based on the PE condition, weights of MTNs converge exponentially and animate the system to evolve towards the target persistently. The tracking error and closed-loop state signals are proved theoretically to be uniformly ultimately bounded (UUB) via Lyapunov-Krasovskii functional. A numerical simulation from the process industry verifies the effectiveness of the proposed method.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
11:54Real-Time Proxy-Control of Re-Parameterized Peripheral Signals using a Close-Loop Interface
Published on: May 8, 2021
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Multi-input and Multi-variable systems
In the absence...