Versatile DIY Route for Incorporation of a Wide Range of Electrode Materials into Rotating Ring Disk Electrodes

Rotating ring disk electrodes (RRDEs) are a powerful and versatile tool for mechanistically investigating electrochemical reactions at electrode surfaces, particularly in the area of electroanalysis and catalysis. Despite their importance, only limited electrode materials (typically glassy carbon, platinum, and gold) and combinations thereof are available commercially. In this work, we present a method employing three-dimensional (3D) printing in conjunction with machined brass components to produce housing, which can accommodate any electrode material in, e.g., pressed powdered pellet, wafer, rod, foil, or vapor deposited onto a conductive substrate form. In this way, the range and usability of RRDEs is extended. This custom do-it-yourself (DIY) approach to fabricating RRDEs also enables RRDEs to be produced at a significant fraction of the cost of commercial RRDEs. To illustrate the versatility of our approach, coplanar boron-doped diamond (BDD) RRDEs are fabricated for the first time using the approach described. Experimental collection efficiencies for the redox couple FcTMA⁺/FcTMA²⁺ are found to be very close to those predicted theoretically. BDD electrodes serve as an ideal electrocatalyst support due to their low background currents, wide solvent potential window in aqueous solution, and chemical and electrochemical stability in acid and alkali solutions. The BDD RRDE configuration is employed to investigate the importance of surface-incorporated nondiamond carbon in BDD on hydrogen peroxide generation via the oxygen reduction reaction in acid solutions.