Related Experiment Video
Updated: Sep 5, 2025

Author Spotlight: Efficient Image Recognition Using Directional Gradient Histogram Technique and Support Vector Machines
Published on: January 5, 2024
Quantitative measure of concrete fragment using ANN to consider uncertainties under impact loading
Kyeongjin Kim1,2, WooSeok Kim3, Junwon Seo4
1Major of Civil Engineering, National Korea Maritime & Ocean University, Busan, 49112, Republic of Korea.
Abstract:
In this study, numerical analysis was performed to predict amount of fragments and travel distance after collision of a concrete median barrier with a truck under impact loading using Smooth Particle Hydrodynamics (SPH). The obtained results of the SPH analysis showed that amount of fragments and the travel distance can be changed depending on different velocity-to-mass ratios under same local impact energy. Using the results of the SPH analysis, artificial neural network (ANN) was constructed to consider the uncertainties for the prediction of amount of fragments and travel distance of concrete after collision. In addition, the results of the ANN were compared with the results of multiple linear regression analysis (MRA). The ANN results showed better coefficient of determination (R2) than the MRA results. Therefore, the ANN showed improvement than the MRA results in terms of the uncertainties of the prediction of amount of fragments and travel distance. Using the constructed ANN, data augmentation was conducted from a limited number of analysis data using a statistical distribution method. Finally, the fragility curves of the concrete median barrier were suggested to estimate the probability of exceed specific amount of fragments and travel distance under same impact energy.
Related Concept Videos
Impact Strength of Concrete
Measurement of Air Content in Concrete
The pressure method,...
Non-destructive Tests for Concrete Strength
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Toughness and Hardness of Aggregate
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...

