High-Sensitivity Flexible Piezoresistive Pressure Sensor Using PDMS/MWNTS Nanocomposite Membrane Reinforced with...

Flexible pressure sensors with high sensitivity and good linearity are in high demand to meet the long-term and accurate detection requirements for pulse detection. In this study, we propose a composite membrane pressure sensor using polydimethylsiloxane (PDMS) and multiwalled carbon nanotubes (MWNTS) reinforced with isopropanol prepared by solution blending and a self-made 3D-printed mold. The device doped with isopropanol had a higher sensitivity and linearity owning to the construction of additional conductive paths. The optimal conditions for realizing a high-performance pressure sensor are a multiwalled carbon nanotube mass ratio of 7% and a composite membrane thickness of 490 μm. The membrane achieves a high linear sensitivity of -57.07 kΩ∙kPa^-1 and a linear fitting correlation coefficient of 98.78% in the 0.13~5.2 kPa pressure range corresponding to pulse detection. Clearly, this device has great potential for application in pulse detection.