Preparation and Application of a Novel Slow-Releasing with Core-Shell Deicer in Asphalt Mixtures

The massive application of chloride salts has a direct effect on the corrosion of structures and vehicles and decreases durability as well as road pavement damage. A novel slow-release deicer with a core-shell structure was prepared to reduce the salts' impacts, subsequently characterized by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). The conductivity evaluation, moisture absorption, and the snow or ice melting performance of the deicer were also tested. The core-shell deicer with different replacement rates was used to prepare the deicing asphalt mixture based on the equivalent volume replacement method. In this study, the high- and low-temperature performance, moisture damage resistance, and snow or ice melting capacity of mixtures were evaluated in the laboratory. The results show that the low-temperature and moisture stability performances decreased, and high-temperature performance improved, as the content of the core-shell deicer was increased. It is confirmed that the replacement rate of the deicer filler should be lower than 75% to meet the specification requirements. The prepared deicing asphalt mixture has good snow and ice melting performance and can reduce the bonding strength between ice and pavement surface. Durability and cost-benefit analysis are expected in further investigations.