Numerical Analysis of Transient Pressure Damping in Viscoelastic Pipes at Different Water Temperatures

Water temperature affects the peak pressure damping of transient flows in viscoelastic pipes. Owing to the viscoelastic properties of pipes, the accuracy of peak pressure damping simulations hinges on both viscoelastic and frictional factors. In simulations, the influence of both factors on peak pressure damping at different water temperatures is unclear. In this study, the Kelvin-Voigt model with both a quasi-steady friction model and modified Brunone model was employed. Based on experimental data, the accuracy of simulated peak pressure damping was verified at four different water temperatures (13.8, 25, 31, and 38.5 °C). From the perspective of energy transfer and dissipation, the influence of viscoelastic and frictional factors on peak pressure damping were clarified, and the applicability of different friction models was determined based on the contributions of viscoelastic and frictional factors to peak pressure damping. The numerical results indicate that the viscoelastic properties of pipes have a greater impact on peak pressure damping than their frictional properties at 25, 31, and 38.5 °C. Higher temperatures result in a delay in the rate of work and a decrease in the frequency of work performed by viscoelastic pipes. Viscoelastic properties play a more important role than frictional ones in calculating peak pressure damping as the water temperature increases. In addition, the one-dimensional quasi-steady friction model can accurately simulate peak pressure damping within a specified water temperature range.