Numerical Simulation and Experimental Study on the TIG (A-TIG) Welding of Dissimilar Magnesium Alloys
Bo Qin1,2, Rui Qu1, Yanfeng Xie1
1School of Mechanical Engineering, Hunan Institute of Engineering, Xiangtan 411104, China.
Abstract:
The welding experiments and numerical simulation analysis of dissimilar magnesium alloy AZ61-AM60 were carried out by TIG and A-TIG methods. The mathematical model of welding pool under three-dimensional transient moving heat source has been established, and the temperature field has been numerically simulated. The influence of welding process parameters on the surface forming quality of welded joints has been discussed. The simulation results show that temperature field distribution of dissimilar magnesium alloy AZ61-AM60 during the TIG welding process presents a certain asymmetry and the shape distribution of the melting field on both sides of the molten pool is asymmetrical. When A-TIG welding was coated with activating flux, the surface of the molten pool is ingot-shaped. These simulation results are verified through experiment investigation. The consistency between the experimental results and the simulation results reveals the variation law of temperature field and molten pool shape in the welding process, which provides an effective guidance for the optimization of welding process parameters of dissimilar magnesium alloys.
