Characterization of Epoxy-Based Rapid Mold with Profiled Conformal Cooling Channel

Based on the experience of the foundry industry, reducing the demolding time is the key for mass production of wax patterns with sophisticated geometries. Integration of numerical simulation and rapid tooling technology for decreasing the time to market is essential in advanced manufacturing technology. However, characterization of epoxy-based rapid molds with a profiled conformal cooling channel (PCCC) using computer-aided engineering simulation of the epoxy-based rapid mold with PCCC was not found in the literature. In this study, epoxy-based rapid molds with PCCC were characterized numerically and experimentally. The cooling performance of wax injection molds with two different kinds of cross-sections of the cooling channel was investigated. Four pairs of injection molds with PCCC were implemented using four different kinds of material formulations. It was found that the cooling performance of the PCCC was better than a circular conformal cooling channel (CCCC) since the PCCC maintained a more uniform and steady cooling performance of injection-molded product than CCCC. Epoxy resin added with 41 vol.% Cu powder seems to be a cost-effective empirical material formulation in terms of cooling time and material costs. This empirical material formulation provided an injection mold with low material cost and good cooling performance simultaneously compared to an injection mold fabricated with commercial material. The cooling performance could reach 88% of that of the injection mold fabricated with commercial material. The material cost of making the injection mold was only about 60% of that of the injection mold fabricated with commercial material. The coolant flow rate had no significant effect on the cooling time, whereas the cooling time of the wax pattern was affected by coolant temperature significantly.