Strength, durability, and microstructure of self-compacting geopolymer concrete produced with copper slag aggregates

Lack of vibrations on fresh concrete negatively influences the compaction and thus the quality of concrete. This is particularly concerning with geopolymer concrete (GPC) containing sodium silicate (Na₂SiO₃), which is viscous in nature. In this study, self-compacting geopolymer concrete (SCGC) containing fly ash (FA) and ultrafine slag (UFS) with copper slag aggregates (CSA) was proposed and investigated. CSA were used as a substitute to sand (by weight) in SCGC at different percentages up to 60%. In the fresh state, slump, T500 slump flow, V-funnel, L-box, U-box, and sieve aggregation ratio tests were performed to investigate flowability, passing ability, and viscosity. At the hardened state, the compressive strength, water absorption, chloride ion resistance and sorptivity tests were examined. The flowability of SCGC improved when CSA were added, and the highest slump of 735 mm was achieved for the mix with 60% CSA. Substitution of up to 20% of CSA enhanced the properties of SCGC at all ages. Mix having 20% CSA (20CSA-SCGC) was superior to other mixes, exhibiting the highest compressive strength (47 MPa) at 365 days while possessing the lowest water absorption, sorptivity, and the highest chloride ion resistance. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) analyses also confirmed the improved microstructure of Mix 20CSA-SCGC. Meanwhile, X-ray diffraction (XRD) analysis confirmed the presence of quartz and calcium silicate hydrate (CSH) products, which were the main contributors to properties enhancement.