Related Experiment Video
Updated: Sep 2, 2025

Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street
Published on: January 20, 2023
Economic feasibility analysis for an electric public transportation system: Two cases of study in medium sized cities
José Tomás Sánchez1, Jesús Antonio Del Río1, Aarón Sánchez1
1Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Temixco, Morelos, México.
Abstract:
This work presents an economic analysis that illustrates the feasibility and the possible benefits related to the replacement of internal combustion vehicles (ICVs)by electric vehicles (EVs) public transportation in medium-sized cities. According to the current operating conditions, we calculate the cost of operating internal combustion vehicles and compare them with a selected EV with approximately the same passenger capacity. We calculate the CO2 emissions in both cases. Moreover, for the case of EV, we analyze two scenarios: 1) Use the grid to charge the EV and 2) a grid-connected photovoltaic system using the available land in the store terminals. The net present value (NPV) indicates the feasibility of two EV replacement scenarios: EV fleet using energy from the grid and EV fleet with a PV system energy generation interconnected to the grid. The economic analysis considers the different prices of electricity according to the existing tariff schemes in Mexico. Due to the electricity generation mix in Mexico, in the case of CO2 emissions, the reduction is not as expected in the only grid connection; but a PV system reduces more than 30% CO2. This analysis was carried out for two medium-sized cities: Morelia, Michoacán, and Cuernavaca, Morelos, both in Mexico.
Related Concept Videos
Maximum Power Flow and Line Loadability
Short-distance Transport of Resources
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
The Power Flow Problem and Solution
Design Example: Alignment of a Road Line Using GIS
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:

