Related Experiment Video
Updated: Sep 2, 2025

Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-based Finite Element Analysis
Published on: March 11, 2017
Femoral neck phantom imaging using time-domain topological energy method
Paulo Tadeu C R Rosa1, Aldo José Fontes-Pereira2, Quentin Grimal3
1Laboratório de Ultrassom, Programa de Engenharia Biomédica-COPPE, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-914, Brazil.
Abstract:
Ultrasonic bone imaging is a complex task, primarily because of the low energy contained in the signals reflected from the internal bone structures. In this study, the reconstruction of a bone-mimicking phantom echographic image using time-domain topological energy (TDTE) is proposed. A TDTE image results from a combination of forward and adjoint fields. The first is a solution of a numerical model that reproduces the setup of the experimental data acquisition to the best extent possible. The second has similar characteristics, but the source term is the time-reversed residue between the forward field and signals obtained from the experiment. The acquisition-reconstruction system used a linear phased-array transducer with a 5 MHz center frequency to acquire the signals and was coupled with a k-wave toolbox to implement the numerical models and perform the image reconstruction. The results showed good agreement between the geometry of the real phantom and the ultrasonic images. However, thickness evaluation errors were observed, which may be due to incorrect assumptions about the velocity models throughout the medium, a priori assumed to be known. Thus, this method has shown promising results and should be applied to the real femoral neck as a long-term objective.

