The Wear Performance of Cu-Based Composites Reinforced with Boron Nitride Nanosheets

Copper matrix composites (CMCs) were prepared by blending Cu particles with boron nitride nanosheets (BNNSs) and then by consolidating the blended particles using spark plasma sintering (SPS). The relative density of the compacts was over 99%, and an intact interface was formed between Cu and the BNNSs. Within the range of the BNNS content studied, its introduction improved microhardness and wear resistance. With the introduction of 0.2 vol% BNNSs, the friction coefficient reduced from 0.15 to merely 0.07, and the wear resistance improved by over 100%. This makes the CMCs reinforced with BNNSs promising materials in applications such as bearings.