Manufacturing of Fluff Pulp Using Different Pulp Sources and Bentonite on an Industrial Scale for Absorbent Hygienic...

In this study, for the first time, a composite fluff pulp was produced based on the combination of softwood (i.e., long-length fiber), hardwood (i.e., short-length fiber), non-wooden pulps (i.e., bagasse) and bentonite, with specific amounts to be used in hygienic pads (e.g., baby diapers and sanitary napkins). After the defibration process, the manufactured fluff pulp was placed as an absorbent mass in diapers and sanitary napkins. Therefore, tests related to the fluff pulp, such as grammage, thickness, density, ash content, humidity percentage, pH and brightness, tests related to the manufactured baby diapers, such as absorption capacity, retention rate, retention capacity, absorption time and rewet, and tests related to the sanitary napkin, such as absorption capacity and rewet, were performed according to the related standards. The results demonstrated that increasing the amount of bagasse pulp led to increasing the ash content, pH and density of fluff pulp and decreasing the brightness. The addition of bentonite as a filler also increased ash content and pH of fluff pulp. The results also demonstrated that increasing of bagasse pulp up to 30% in combination with softwood pulp led to increasing absorption capacity, retention rate, retention capacity, absorption time and rewet of baby diapers and of sanitary napkins.