Environmental impact assessment of post-combustion CO₂ capture technologies applied to cement production plants

Decarbonizing the cement manufacturing sector presents an interesting and pressing challenge as it is one of the largest energy consumers in industry (i.e., 7%), emitting considerable amounts of anthropogenic carbon dioxide (i.e., 7%). This paper performs a technical and environmental assessment of decarbonisation of cement production through process modelling and simulation, thermal integration analysis, and Life Cycle Assessment (LCA). Integration of three post-combustion capture methods for a conventional cement plant with an annual productivity of one million tons and a carbon capture rate of 90% is evaluated in comparison to the reference case without carbon capture and storage (CCS). Mass and energy balances derived from simulations are used for the assessment of three innovative capture systems: reactive gas-liquid absorption using Methyl-Di-Ethanol-Amine, reactive gas-solid adsorption using calcium looping (CaL) technology and membrane separation. For the LCA study, a "cradle-to-gate" approach is carried out using GaBi software, according to the ReCiPe impact assessment method. The general conclusion is that integrating the CCS methods into the cement production process leads to a decrease in global warming potential (GWP) in the range of 69.91%-76.74%. Of the CCS technologies analysed, CaL technically outperforms the others as it requires 34% less coal and provides 1.6 times higher gross energy efficiency. From an environmental perspective, CaL integration ranks first, with the lowest scores in six of the nine impact categories and a GWP reduction of 76.74% compared to the baseline scenario without CCS.