Scaled Sea Surface Design and RCS Measurement Based on Rough Film Medium

The electromagnetic (EM) scattering characteristics of the rough sea surface is very important for target surveying and detection in a sea environment. This work proposes a scaled sea surface designing method based on a rough thin-film medium. For the prototype sea surface, the permittivity is calculated with the seawater temperature, salinity, and EM wave frequency according to the Debye model. The scale film material is mixed with carbon black and epoxy, whose volume ratio is optimized with the genetic algorithm through the existing electromagnetic parameter library. This method can overcome the previous difficulties of adjusting the same permittivity of the prototype sea water. According to the EM scaled theory, the scaled geometric sample is numerically generated with the D-V spectrum for the given wind speed, and is fabricated using 3D printing to keep the similar seawater shape. Then, the sample is sprayed with a layer of film material for EM scattering measurement. The simulated and measured radar cross-section (RCS) results show good consistency for the prototype seawater and scaled materials, which indicates the proposed scaled method is a more efficient method to get the seawater scattering characteristics.