Valorization and Development of Acorn Starch as Sustainable and High-Performance Papermaking Additive for Improving
Ali Baradaran Khaksaar1, Hossein Jalali Torshizi1, Yahya Hamzeh2,3
1Department of Biorefinery, Faculty of New Technologies and Aerospace Engineering, Shahid Beheshti University, Velenjak, Tehran, Iran.
Abstract:
Improving bagasse pulp and paper properties using forest-byproduct biomass, native Acorn starch (NAS), was compared with conventional wet-end additive cationic corn starch (CCS). The extracted acorn starch was characterized by SEM, XRD, and GPC. The results clearly showed irregular granular shape (6-12 μm) with rough surfaces, CA-type XRD pattern, and 436.2 kDa molecular weights for NAS. The bagasse pulp retention and drainage as keys of operation performance and runnability were superior by NAS in comparison with CCS, while the lowest dosage of NAS (0.5%) showed superior results than the highest dosages of CCS (1% & 1.5%). The higher NAS adsorption onto the fiber surfaces compared to CCS could be concluded by higher water retention value (WRV) of the pulp together with higher density (up to 20%) and mechanical properties of the produced paper, e.g., tensile (up to 63%), burst (up to 37%) and tear (up to 11%) indices. NAS exploiting naturally as a papermaking additive would provide performance higher than commercial chemically-modified starch.
More Related Videos
08:52Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
07:25Green and Low-cost Production of Thermally Stable and Carboxylated Cellulose Nanocrystals and Nanofibrils Using Highly Recyclable Dicarboxylic Acids
Published on: January 9, 2017
