Strength of Partially Encased Steel-Concrete Composite Column for Modular Building Structures

Modular structural systems have been used increasingly for low- and mid-rise structures such as schools and apartment buildings, and applications are extending to high-rise buildings. To provide sufficient resistance and economical construction of the high-rise modular structural system, the steel-concrete composite unit modular structure was proposed. The proposed composite unit modular system consists of the composite beam and the partially encased nonsymmetrical composite column. The outside steel member of the composite column has an open section, and is manufactured using a pressed forming procedure so that easy joining connecting work and manufacturing cost reductions are possible. However, the design methods are complicated due to the inherent nonsymmetrical properties of the section. Therefore, in this study, the focus was made on the strength evaluation and development of design methods for the partially encased nonsymmetrical steel-concrete composite column. Four full-scale specimens were constructed and tested. The experimental study focused on the effect of the slenderness ratio of the column, eccentricity, and the through bars on the strength of such columns. Additionally, the P-M interaction curve to estimate the strength of the proposed composite column under general combined loading was developed based on the plastic stress distribution method. The results indicate that the through bars are needed to delay the local buckling and distribute the loading uniformly throughout the composite column. Finally, the proposed design methods provide a conservative strength prediction of the proposed composite column.