Laser Surface Alloying of Sintered Stainless Steel

A characteristic feature of sintered stainless steel (SSS) is its porosity. Porosity results in a lower density of steel, making attractive components for producing lightweight structures and materials used in industry (e.g., the automotive industry or aerospace). Scientists also observe that porosity adversely affects steel's properties, especially its strength properties. One of the proposals for improving the discussed properties is the use of surface treatment of sintered stainless steels, e.g., with the use of concentrated energy sources such as plasma beams or laser beams. However, this proposal is an incidental subject of research, which is not justified from the point of view of the obtained research results presented by a few research groups. In this study, the surface modification (surface treatment) of sintered stainless steel was presented. The authors proposed the use of two surface treatments in order to compare them and obtain the best results. The first treatment was the deposit of Cr₃C₂-NiCr coatings on SSS surfaces using the atmospheric plasma spraying (APS) method. The second treatment was to create surface layers on SSSs by laser alloying the surface with a CO₂ laser. Due to high precision and ease of automation, the most common methods in surface alloying treatment are laser technologies. This research's main aim was to analyze the microstructure and strength properties of the SSS surface layer. The research confirms that applying the Cr₃C₂-NiCr coating and modifying the surface layer through the laser alloying method improves the mechanical properties of SSSs.