Related Experiment Video
Updated: Aug 29, 2025

Dosimetry for Cell Irradiation using Orthovoltage 40-300 kV X-Ray Facilities
Published on: February 20, 2021
Comparison of Shielding Material Dispersion Characteristics and Shielding Efficiency for Manufacturing Medical X-ray
1Department of Biomedical Engineering, School of Medicine, Keimyung University, 1095 Dalgubeol-daero, Daegu 42601, Korea.
Abstract:
During medical diagnoses, X-ray shielding barriers are used to protect against direct and indirect X-rays. Currently, lead is used as the primary material for shielding barriers; however, the demand for eco-friendly shielding barriers has been increasing. Conventionally, shielding barriers are manufactured using a mechanically bonded combination of lead and aluminum; however, in this study, a plastic-based injection-molded product was developed using tungsten as an eco-friendly alternative to lead. A new process technology was required for mixing tungsten-which can be difficult to process-with a polymer. Consequently, the mixing conditions within the injection molding machine and the related compounding technology factors were analyzed. The process technology considered the pre-mixing method using powdery polymer, particle dispersion method, number of screw rotations, and amount of filler input. The product's shielding performance was then analyzed. The tungsten content of the 2-mm thick barrier manufactured using the proposed method was 90 wt%, and the lead equivalent was 0.321 mmPb. To increase the effectiveness of injection molding in the manufacturing process, specific hourly compounding conditions were proposed. Consequently, the process technology method developed in this study can be considered suitable for manufacturing various shielding barriers.
More Related Videos
07:31Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator
Published on: May 9, 2014
06:20Irradiator Commissioning and Dosimetry for Assessment of LQ α and β Parameters, Radiation Dosing Schema, and in vivo Dose Deposition
Published on: March 11, 2021
Related Concept Videos
Biological Effects of Radiation
Types of Radioactivity
Alpha (α) decay is the emission of an α particle from the nucleus. For example, polonium-210 undergoes α decay:
X-ray Imaging
Diamagnetic Shielding of Nuclei: Local Diamagnetic Current
Imaging Studies for Cardiovascular System III: X-Ray
Definition and Purpose
An X-ray, or radiograph, is a non-invasive method that uses ionizing radiation to take images of internal structures. It is mainly used in cardiac imaging to examine the heart, lungs, and major blood vessels, aiming to identify abnormalities in the heart's size, shape, and position, such as heart failure, congenital defects, and vascular...
Nuclear Power
Nuclear Fuels
Nuclear fuel consists of a fissile isotope, such as uranium-235, which must be present in sufficient quantity to provide a...