Bottom-up plasma-enhanced atomic layer deposition of SiO₂ by utilizing growth inhibition using NH₃ plasma...

The design-rule shrinkage in semiconductor devices is a challenge at every step of the integration process. In the gap-fill process for isolation, the seam and void formation cannot be suppressed by using a deposition process, which even has excellent step coverage. To achieve seamless gap fill in the high-aspect-ratio structure, which has a non-ideal etch profile such as a negative slope, the deposition process should be able to realize the "bottom-up growth" behavior. In this work, the bottom-up growth of a SiO₂ plasma-enhanced atomic layer deposition (PE-ALD) process in a trench structure was investigated by using a growth inhibition process employing plasma treatment. N₂ and NH₃ plasma pre-treatments were employed to suppress the growth of the SiO₂ PE-ALD process without any contamination, and the inhibition mechanism was investigated by performing surface chemistry analyses using X-ray photoelectron spectroscopy. Furthermore, the gap-fill characteristics of the SiO₂ PE-ALD process were examined, depending on the process conditions of NH₃ plasma pre-treatment, by performing cross-sectional field emission scanning electron microscopy measurements. Finally, a seamless gap-fill process in a high-aspect-ratio trench pattern was achieved by the bottom-up growth behavior of SiO₂ PE-ALD using NH₃ plasma pre-treatment.