Manifestation of TASER drive stun burn marks on fabrics

The TASER® is a type of conducted energy weapon (CEW) used with increasing frequency by law enforcement to subdue subjects in circumstances where compliance is necessary. When operated in the drive stun method of deployment, the electrodes at the head of this CEW are intended to make direct contact with a surface, generating heat and light which may result in burn marks as a by-product of the electrical discharge that occurs. This research aims to tackle a crucial gap in CEW research that fails to address the appearance of burn marks on fabrics. A drive stun duration (DSD) of 1, 3, and 5 s was used with three TASER models (X26P, X2, & TASER 7) on three fabrics (white 100% cotton, 100% polyester, 35:65 cotton-polyester blend) with an underlying backing of pork hock. Using a Keyence VHX-6000 confocal microscope, high magnification images were taken to observe any qualitative changes to the fabric. On polyester fabric, with increasing DSD, darker brown discoloration occurred. Additionally, on polyester fabric, the spatial orientation of the burn marks corresponded with that of the electrodes at the muzzle of each TASER model. These features enabled the correct identification of the TASER model and DSD on polyester fabric in the blind tests performed. Evidence of burn marks on cotton and blend fabrics were both limited and inconsistent such that no features were sufficiently unique to link them to any TASER model or DSD. Despite this, overall features such as discoloration and the formation of holes on these fabric types may be sufficiently unique to suggest the use of a CEW.