The Biomechanical Profile of an Osseo-Integrated Rectangular Block Implant: A Pilot In Vivo Strain Analysis

Aim: To load-test the osseo-integrated rectangular block implant (RBI), measure the generated cortical peri-implant strains, and relate these findings to known human physiological parameters. Materials and methods: Two RBIs were placed into the posterior mandibular saddle in a mature greyhound dog and allowed to osseo-integrate. The half mandible (implants in situ) was mounted in a servohydraulic system. Four triple-stacked rosette gauges were placed cortically (mesial, distal, buccal, and lingual). A modified ISO-14801 protocol was used (1000 N, 30⁰, 2 Hz, 1 h) and the generated principal strains (ep, eq) and their angular orientations (F), were calculated. Results: (1) Bucco-lingual "horizontal" dimension: dominant "horizontal" compressive stresses were on the lingual aspect and "horizontal" tensile stresses on the buccal aspect. The buccal cortex was elastically tensile-stretched, while the lingual cortex was elastically compressed. (2) Bucco-lingual "vertical" dimension: dominant vertical torsional stresses were oriented buccally and apically, with an overall buccally inclined torsional effect. This was also evidenced on the lingual aspect, where there remained high torsional rotation elements (high F and e2). (3) Mesio-distal "horizontal" dimension: dominant torsional stresses oriented as a distal-lingual "counter-clockwise" rotation. Conclusions: The applied off-axial loads generated a heterogeneous pattern of bucco-lingual and mesio-distal cortical strains, both vertically and horizontally. The short dimensioned osseo-integrated RBI design appeared to biomechanically withstand the applied loads and to maintain the strains generated to levels that were within physiological limits. More studies and statistical analyses are needed to confirm these findings.