Related Experiment Video
Updated: Aug 28, 2025

Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
The Investigation of Compacting Cement Systems for Studying the Fundamental Process of Cement Gel Formation
Alexey N Beskopylny1, Sergey A Stel'makh2, Evgenii M Shcherban'2
1Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia.
Abstract:
Fundamental knowledge of the processes of cement gel formation for new generation concretes is a scientific deficit. Studies aimed at the formation of a cement gel for standard vibrated concrete research, and especially for centrifugally compacted concrete, are of interest because the structure of this concrete differs significantly from the structure of standard vibrated concrete. This article aims to study the fundamental dependencies of the theoretical and practical values that occur during compaction using vibration, as well as the centrifugal force of new emerging concrete structures. New theoretical findings about the processes of cement gel formation for three technologies were developed: vibrating, centrifuging, and vibrocentrifuging of concrete; the fundamental difference in gel formation has been determined, the main physical and chemical processes were described, and a significant effect of technology on the gel formation process was established. The influence of indirect characteristics based on the processes of cement gel formation, rheological properties of concrete mixtures, water squeezing processes, and the ratio between the liquid and solid phases in the mixture was evaluated. The process of formation of cement gel for centrifugally compacted cement systems was studied and graphical dependences were constructed, giving answers to the mechanism of interaction according to the principle "composition-rheological characteristics-structure-properties of concrete". The quantitative aspect of the achieved result is expressed in the increase in the indicators demonstrated by centrifuged and especially vibrocentrifuged samples compared to vibrated ones. Additionally, in terms of strength indicators, vibrocentrifuged samples demonstrated an increase from 22% to 32%, depending on the type of strength, and the rheological characteristics of concrete mixes differed by 80% and 300% in terms of delamination.
Related Concept Videos
Soundness of Cement
Hydration of Cement
Setting Time of Cement
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Fineness of Cement
Direct...

