AMOLED Pixel Circuit Using LTPO Technology Supporting Variable Frame Rate from 1 to 120 Hz for Portable Displays

This paper proposes a new 6T1C pixel circuit based on low-temperature polycrystalline oxide (LTPO) technology for portable active-matrix organic light-emitting diode (AMOLED) displays with variable refresh rates ranging from 1 to 120 Hz. The proposed circuit has a simple structure and is based on the design of sharing lines of switch-controlling signals. It also provides low-voltage driving and immunity to OLED degeneration issues. The calculation and analysis of programming time are discussed, and the optimal storage capacitor for the proposed circuit's high-speed driving is selected. The results of the simulation reveal that threshold voltage variations in driving thin-film transistors of ±0.33 V can be well sensed and compensated with a 1.8% average shift of OLED currents in high-frame-rate operation (120 Hz), while the maximum variation in OLED currents within all gray levels is only 3.56 nA in low-frame-rate operation (1 Hz). As a result, the proposed 6T1C pixel circuit is a good candidate for use in portable AMOLED displays.