Multiscale Kernel-Based Residual CNN for Estimation of Inter-Turn Short Circuit Fault in PMSM
Qiang Song1, Mingsheng Wang1, Wuxuan Lai1
1National Engineering Laboratory for Electric Vehicles, Beijing Institute of Technology (BIT), Beijing 100081, China.
Abstract:
The diagnosis of an inter-turn short circuit (ITSC) fault at its early stage is very important in permanent magnet synchronous motors as these faults can lead to disastrous results. In this paper, a multiscale kernel-based residual convolutional neural network (CNN) algorithm is proposed for the diagnosis of ITSC faults. The contributions are majorly located on two sides. Firstly, a residual learning connection is embedded into a dilated CNN to overcome the defects of the conventional convolution and the degradation problem of a deep network. Secondly, a multiscale kernel algorithm is added to a residual dilated CNN architecture to extract high-dimension features from the collected current signals under complex operating conditions and electromagnetic interference. A motor fault experiment with both constant operating conditions and dynamics was conducted by setting the fault severity of the ITSC fault to 17 levels. Comparison with five other algorithms demonstrated the effectiveness of the proposed algorithm.
Related Concept Videos
Power System Three-Phase Short Circuits
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Three-Phase Short Circuit—Unloaded Synchronous Machine
This behavior occurs due to the magnetic flux produced by the short-circuit armature currents. Initially, these currents follow high-reluctance paths but eventually shift to...
Series R—L Circuit Transients
Using Kirchhoff's Voltage Law (KVL) to analyze this circuit helps determine the total asymmetrical fault current, which consists...
Fault Types
For line-to-line faults occurring between phases B and C, the...


