Application of Adaptive Filtering Based on Variational Mode Decomposition for High-Temperature Electromagnetic...

In high-temperature environments, the signal-to-noise ratio (SNR) of the signal measured by electromagnetic acoustic transducers (EMAT) is low, and the signal characteristics are difficult to extract, which greatly affects their application in practical industry. Aiming at this problem, this paper proposes the least mean square adaptive filtering interpolation denoising method based on variational modal decomposition (AFIV). Firstly, the high-temperature EMAT signal was decomposed by variational modal decomposition (VMD). Then the high-frequency and low-frequency noises in the signal were filtered according to the excitation center frequency. Following the wavelet threshold denoising (WTD) for the noise component after VMD decomposition was carried out. Afterward, the noise component and signal component were connected by an adaptive filtering process to achieve further noise reduction. Finally, cubic spline interpolation was used to smooth the noise reduction curve and obtain the time information. To verify the effectiveness of the proposed method, it was applied to two kinds of ultrasonic signals from 25 to 700 °C. Compared with VMD, WTD, and empirical mode decomposition denoising, the SNR was increased by 2 times. The results show that this method can better extract the effective information of echo signals and realize the online thickness measurement at high temperature.