Solution-Processed Ternary Tin (II) Alloy as Hole-Transport Layer of Sn-Pb Perovskite Solar Cells for Enhanced...

Tin-lead (Sn-Pb) narrow-bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, a ternary Sn (II) alloy of SnOCl is reported as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution-processed SnOCl layer has a texture structure that not only reduces the optical loss of the devices, but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 µm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency (IQE) of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1200 h, and keeps 85% efficiency under 85 °C thermal stress for 1500 h. The hybrid HTM further improves the stabilized efficiencies of single-junction Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multicomponent metal alloys as HTM in PSCs.