Contact analysis and performance evaluation of ring type traveling wave ultrasonic motors based on a surface contact...

A surface contact model of ring type traveling wave ultrasonic motors is proposed in this paper in order to describe the circular three-dimensional contact and friction problem between the stator and rotor accurately. Differing from previous contact models of traveling wave ultrasonic motors, the flexibility of the rotor, which results in the irregular shape of contact area and inhomogeneous distribution of contact pressure along radial direction, is taken into account in the proposed model. The normal contact between the stator and rotor is analyzed with finite element method and the tangential force transmission on the contact surface is investigated with analytical method. The contact pressures and the tangential stresses on the contact surface are obtained. Mechanical performances of the motor are also studied based upon the proposed model. Finally, torque-speed curves of a prototype motor are measured and compared with the calculated results of the proposed model, and good agreements are obtained. In addition, the proposed surface contact model is compared with previous line contact models. It is found that the calculated results of the surface contact model are closer to measured results than those of line contact models. The comparison results verify the accuracy of the proposed surface contact model.