Related Experiment Video
Updated: Aug 25, 2025

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
Improved Electrical Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Al2O3/ZrO2 Stacked Gate
Cheng-Yu Huang1, Soumen Mazumder1, Pu-Chou Lin2
1Department of Electrical Engineering, Institute of Microelectronics, National Cheng-Kung University, Tainan 701, Taiwan.
Abstract:
A metal-oxide-semiconductor high-electron-mobility transistor (MOS-HEMT) is proposed based on using a Al2O3/ZrO2 stacked layer on conventional AlGaN/GaN HEMT to suppress the gate leakage current, decrease flicker noise, increase high-frequency performance, improve power performance, and enhance the stability after thermal stress or time stress. The MOS-HEMT has a maximum drain current density of 847 mA/mm and peak transconductance of 181 mS/mm. The corresponding subthreshold swing and on/off ratio are 95 mV/dec and 3.3 × 107. The gate leakage current can be reduced by three orders of magnitude due to the Al2O3/ZrO2 stacked layer, which also contributes to the lower flicker noise. The temperature-dependent degradation of drain current density is 26%, which is smaller than the 47% of reference HEMT. The variation of subthreshold characteristics caused by thermal or time stress is smaller than that of the reference case, showing the proposed Al2O3/ZrO2 stacked gate dielectrics are reliable for device applications.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

