Related Experiment Video
Updated: Aug 23, 2025

A Filter-based Surface Enhanced Raman Spectroscopic Assay for Rapid Detection of Chemical Contaminants
Published on: February 19, 2016
Detection of hazardous chemical using dual-wavelength Raman spectroscopy in the ultraviolet region
Jae Hwan Lee1, Young-Su Jeong1, Young-Jin Koh1
1Chem-Bio Technology Center, Agency for Defense Development, Daejeon 34060, Republic of Korea.
Abstract:
This study proposes a stand-off Raman spectroscopy system using dual-wavelength in the ultraviolet (UV) region to detect hazardous chemicals. The Raman spectrum generated by the UV excitation source avoids solar background noise during daytime for chemical detection as the spectrum is in the solar blind range. Wavelengths of 213 and 266 nm by 5th and 4th harmonics are generated from Nd:YAG laser. However, Raman spectra of chemicals exhibit different signal-to-noise ratios for both the excitation wavelengths; therefore, to detect such chemicals, Raman spectra by two sources are required. Raman spectra were acquired using a dual-wavelength laser and spectrometer with a single grating and detector at the wavelengths of 213 and 266 nm simultaneously. The Raman spectra of sulfuric acid, 2-chloroethyl ethyl sulfide, and dimethyl methylphosphonate were acquired and analyzed, thus highlighting the application of dual-wavelength Raman spectroscopy. For efficient chemical detection in the field, we have ensured that the system developed in this study is robust.
Related Concept Videos
Ultraviolet and Visible (UV–Vis) Spectroscopy: Overview
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...
UV–Vis Spectrometers
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography: Types of Detectors-II

