Related Experiment Video
Updated: Aug 22, 2025

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Nominal-Model-Based Sliding-Mode Control for Traveling-Wave Ultrasonic Motor
Jing Liang1, Kai Jing2,3, Yan Dong2,3
1School of Artificial Intelligence, Hebei University of Technology, Tianjin 300130, China.
Abstract:
Traveling-wave ultrasonic motors (TWUSMs) have strong nonlinearity and uncertainty, which are sensitive to the environment, disturbances, and load changes. Thus, precision control of TWUSMs is hard to achieve with traditional methods for complex driving mechanisms. A nominal-model-based sliding-mode control strategy with strong robustness is proposed to achieve accurate speed control of TWUSMs. Firstly, a second-order nominal model of the speed difference and output torque was deduced to construct a nonlinear sliding-mode surface; then, a nonlinear sliding-mode controller was designed with the collaborative regulation of frequency and the amplitude of two-phase control voltages. The global asymptotic stability of the controller was proved under bounded disturbances and parameter uncertainty. Finally, the effectiveness and accurate control were testified to and verified by the simulations and experiments, which showed good robustness and a disturbance rejection of the strategy for TWUSMs, with strong nonlinearity and uncertainty.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
08:59Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators
Published on: June 13, 2022
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Relative Motion Analysis - Acceleration
Simplified Synchronous Machine Model
In this model, each generator is connected to a...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Relative Motion Analysis - Velocity
When an external force is exerted, it sets the crank into a rotational movement. This, in turn, instigates the motion of the connecting rod, leading to what is referred to as a general plane motion. This process involves two key points - point A on the connecting rod...