Flexible Superhydrophobic Microlens Arrays for Humid Outdoor Environment Applications

A microlens array (MLA) is an essential optical imaging device in the applications of augmented and virtual realities. The imaging of MLA would become blurry in a humid outdoor atmosphere. While the incorporation of superhydrophobicity to MLA would prevent the adhesion of droplets, the complex structure and the multiple fabrication process reduce the capability of optical imaging of MLA. Herein, a flexible superhydrophobic MLA with good optical imaging capability is successfully fabricated by the combination of 3D direct laser writing (DLW) and soft lithography. 3D DLW allows the fabrication of MLA with a hierarchical pillar array (h-MLA) in one step, which ensures good optical properties of the resulting polydimethylsiloxane (PDMS) h-MLA. The resulting h-MLAs with pitches ranging between 50 and 100 μm are superhydrophobic from which water droplets slide away at a sliding angle smaller than 15.6° and bounce off from the surface. Meanwhile, the hierarchical pillar array has a limited impact on the imaging capability and the field of view of h-MLA. With an optimized pitch of 60 μm, h-MLA has a transparency as good as MLA. Moreover, PDMS h-MLA retains excellent optical and superhydrophobic properties when bent and in an extremely humid environment. We believe that the proposed h-MLA could find applications in outdoor environments.