Related Experiment Video
Updated: Aug 20, 2025

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Spatial allocation of LID practices with a water footprint approach
Wen-Kai Chuang1, Zih-Ee Lin1, Tzu-Chi Lin1
1Graduate Institute of Environmental Engineering, National Taiwan University, No. 71, Chou-Shan Rd., Daan District, Taipei City 106, Taiwan.
Abstract:
Urban water problems due to stormwater have been aggravated by the higher frequency of high-intensity precipitation events and the increase of paved surfaces. However, with appropriate stormwater management practices, such as low-impact development (LID), stormwater can provide an additional urban water resources rather than cause damage. This study aims to apply a water footprint to location determination of LID practices in the urban area. The LID planning procedure was demonstrated with the highest population density region in Taipei, Taiwan. In order to improve the spatial resolution of LID allocation, the "first-level dissemination area" with 450 residents was used as a spatial unit. The performance of LID practices was then evaluated with the simulation using the Storm Water Management Model (SWMM). Three LID practices, rainwater harvesting systems, permeable pavements, and bioretention systems, were selected. After the water footprint accounting, ten sites were suggested for LID implementation. The runoff reduction rate reached up to 65 % by rainwater harvesting systems or at least 3 % by permeable pavements. This study provides a simpler and more effective approach to ways of integrating an urban water footprint into LID planning and stormwater management in urban areas.
More Related Videos
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Adaptations that Reduce Water Loss
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Sustainable Development
Design Example: Design of an Irrigation Channel
Design Example: Alignment of a Road Line Using GIS

