Towards efficient heterotrophic recovery of N2O via Fe(II)EDTA-NO: A modeling study
Ronghua Deng1, Pengfei Huo1, Xueming Chen1
1Fujian Provincial Engineering Research Center of Rural Waste Recycling Technology, College of Environment and Safety Engineering, Fuzhou University, Fuzhou 350116, China.
Abstract:
Efficient recovery of nitrous oxide (N2O) through heterotrophic denitrification with the help of Fe(II)EDTA-NO as a chelating agent has been regarded as an ideal technology to treat nitric oxide (NO)-rich flue gas. In this study, an integrated NO-based biological denitrification model was developed to describe the sequential reduction of the NO fixed in Fe(II)EDTA-NO with organic carbon as the electron donor. With the inclusion of only the key pathways contributing to nitrogen transformation, the model was firstly developed and then calibrated/validated and evaluated using the data of batch tests mediated by the identified functional heterotrophic bacteria at various substrates concentrations and then used to explore the possibility of enhancing N2O recovery by altering the substrates condition and reactor setup. The results demonstrated that the optimal COD/N ratio decreased consistently from 1.5 g-COD/g-N at the initial NO concentration of 40 g-N/m3 to 1.0 g-COD/g-N at the initial NO concentration of 420 g-N/m3. Furthermore, sufficiently increasing the headspace volume of the reactor was considered an ideal strategy to obtain ideal N2O production of 86.6 % under the studied conditions. The production of high-purity N2O (98 %) confirmed the practical application potential of this integrated treatment technology to recover a valuable energy resource from NO-rich flue gas.
Related Concept Videos
Metabolism of Chemolithotrophs
EDTA: Auxiliary Complexing Reagents
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Effects of EDTA on End-Point Detection Methods
In the visual method, metal-ion indicators (metallochromic dyes), which have distinct colors in their free and complex forms, are added to the mixture to signal the titration's end point. They form stable complexes with metal ions, but these complexes are weaker than the corresponding metal–EDTA complexes. As a...


