Related Experiment Video
Updated: Aug 19, 2025

Automated Deployment of an Internet Protocol Telephony Service on Unmanned Aerial Vehicles Using Network Functions Virtualization
Published on: November 26, 2019
V2X Communication between Connected and Automated Vehicles (CAVs) and Unmanned Aerial Vehicles (UAVs)
Ozgenur Kavas-Torris1, Sukru Yaren Gelbal1, Mustafa Ridvan Cantas1
1Automated Driving Lab, Ohio State University, 1320 Kinnear Rd, Columbus, OH 43212, USA.
Abstract:
Connectivity between ground vehicles can be utilized and expanded to include aerial vehicles for coordinated missions. Using Vehicle-to-Everything (V2X) communication technologies, a communication link can be established between Connected and Autonomous vehicles (CAVs) and Unmanned Aerial vehicles (UAVs). Hardware implementation and testing of a ground-to-air communication link are crucial for real-life applications. In this paper, the V2X communication and coordinated mission of a CAV & UAV are presented. Four methods were utilized to establish communication between the hardware and software components, namely Dedicated Short Range communication (DSRC), User Datagram Protocol (UDP), 4G internet-based WebSocket and Transmission Control Protocol (TCP). These communication links were used together for a real-life use case scenario called Quick Clear demonstration. In this scenario, the first aim was to send the accident location information from the CAV to the UAV through DSRC communication. On the UAV side, the wired connection between the DSRC modem and Raspberry Pi companion computer was established through UDP to get the accident location from CAV to the companion computer. Raspberry Pi first connected to a traffic contingency management system (CMP) through TCP to send CAV and UAV location, as well as the accident location, information to the CMP. Raspberry Pi also utilized WebSocket communication to connect to a web server to send photos that were taken by the camera that was mounted on the UAV. The Quick Clear demonstration scenario was tested for both a stationary test and dynamic flight cases. The latency results show satisfactory performance in the data transfer speed between test components with UDP having the least latency. The package drop percentage analysis shows that the DSRC communication showed the best performance among the four methods studied here. All in all, the outcome of this experimentation study shows that this communication structure can be utilized for real-life scenarios for successful implementation.
More Related Videos
Related Concept Videos
Pilot and Numeric Relaying
Absolute Motion Analysis- General Plane Motion
As the drone's propellers rotate, an upward force is generated that counteracts the force of gravity, enabling the drone to lift off from the ground. This initial movement of the drone is along a straight path, representing a form of translational motion. In this phase, every point on the...
Motor Units
Motor units come in different sizes, with smaller units...
Types of Global Positioning System Surveys
Communication
Types of Collisions - II

