Related Experiment Video
Updated: Aug 18, 2025

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
Explicit Thermal Resistance Model of Self-Heating Effects of AlGaN/GaN HEMTs with Linear and Non-Linear Thermal
Surajit Chakraborty1, Walid Amir1, Ju-Won Shin1
1Department of Electrical, Electronic and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea.
Abstract:
We presented an explicit empirical model of the thermal resistance of AlGaN/GaN high-electron-mobility transistors on three distinct substrates, including sapphire, SiC, and Si. This model considered both a linear and non-linear thermal resistance model of AlGaN/GaN HEMT, the thickness of the host substrate layers, and the gate length and width. The non-linear nature of channel temperature-visible at the high-power dissipation stage-along with linear dependency, was constructed within a single equation. Comparisons with the channel temperature measurement procedure (DC) and charge-control-based device modeling were performed to verify the model's validity, and the results were in favorable agreement with the observed model data, with only a 1.5% error rate compared to the measurement data. An agile expression for the channel temperature is also important for designing power devices and monolithic microwave integrated circuits. The suggested approach provides several techniques for investigation that could otherwise be impractical or unattainable when utilizing time-consuming numerical simulations.
Related Concept Videos
Types of Semiconductors
Small-Signal Analysis of BJT Amplifiers
Theory of Metallic Conduction
In this theory, Newton's second law of motion is used to determine the acceleration of an electron in the presence of an applied electric field. Then, its velocity is expressed via this acceleration.
An electron moves through the crystal, containing positive ions,...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in...
Small-signal Diode Model

