A standardized method for genus Colletotrichum characterization by isothermal microcalorimetry using thermokinetic...

A new standardized method, using isothermal microcalorimetry (IMC), was established to determine thermokinetic parameters from heat flow curves and to demonstrate the reproducibility and repeatability of the parameters of five Colletotrichum species on different days. Measurements on IMC were made at different periods and by two operators. Repeatability and reproducibility (R&R) measurement system analysis was performed on the technique used to measure the heat flow of Colletotrichum strains. The results showed that the %GageR&R was found to be within the acceptable ranges of a measurement system. Also, the parameters obtained from the curves were subjected to a combination of Principal Component Analysis (PCA) and Clustering, the data showed that the total heat (H_t) and maximum growth rate (μ_max) are probably the most specific distinguishing characteristic of the strains evaluated in this study. This study demonstrates, for the first time, the usefulness of IMC in obtaining heat flow curves and thermokinetic parameters, providing repeatable and reproducible measurements over a period and under controlled conditions, for future identifications of phytopathogenic fungi.