Related Experiment Video
Updated: Aug 16, 2025

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
Compact Dual Circularly-Polarized Quad-Element MIMO/Diversity Antenna for Sub-6 GHz Communication Systems
Sachin Kumar1, Sandeep Kumar Palaniswamy1, Hyun Chul Choi2
1Department of Electronics and Communication Engineering, SRM Institute of Science and Technology, Kattankulathur 603203, India.
Abstract:
In this paper, a compact dual circularly-polarized (CP) planar multiple-input-multiple-output (MIMO) antenna is presented for a sub-6 GHz frequency band. The antenna consists of four identical resonating elements, which are placed in a mirrored-image pattern to obtain polarization diversity. Element 2 is a mirror image of element 1, and elements 3 and 4 are mirror images of elements 1 and 2. Each antenna element comprises an elliptical resonator, a 50-Ω microstrip feed line, and a rectangular stub integrated with the feed to increase the surface current path of the antenna, shifting the resonating frequency to the lower side. Additionally, the rectangular stub is lengthened towards the right side (along the +x-axis direction in the antenna element 1), which balances the magnitude and 90° phase variance among the horizontal (E) and vertical (E) fields. The proposed MIMO antenna supports both types of circular polarization, where radiators 1 and 3 radiate right-hand CP (RHCP) rays and radiators 2 and 4 radiate left-hand CP (LHCP) rays. Developing a compact-size MIMO antenna is a challenging task, especially when the antenna elements share the same ground plane and are placed less than half a wavelength apart. The mutual coupling in the proposed antenna is reduced by increasing the spacing between the elements without the use of any extra decoupling structure. Optimal spacing is maintained to achieve compact geometry with less inter-element correlation. The radiators are closely placed with an edge-to-edge spacing of 0.08λ0, where λ0 is the free space wavelength at 3.6 GHz. A peak gain of 5 dBi, efficiency of 90%, an envelope correlation coefficient (ECC) of less than 0.1, and isolation of more than 18 dB are obtained between different ports of the prototype antenna. The overall size of the antenna element is 17 mm × 17 mm × 1.6 mm, and the MIMO antenna is 40 mm × 40 mm × 1.6 mm.
Related Concept Videos
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Generating Electromagnetic Radiations
Induced Electric Dipoles
Since the absolute value of potential energy holds no physical meaning, its zero value can be chosen as per...
Dual Nature of Electromagnetic (EM) Radiation
Wavelength is the distance between two consecutive peaks (the highest point) or troughs (the lowest point) in the wave. Frequency is the...
Transmission Line Design Considerations
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.

