Scaled-Up Synthesis of Freestanding Molybdenum Disulfide Membranes for Nanopore Sensing

2D materials are ideal for nanopores with optimal detection sensitivity and resolution. Among these, molybdenum disulfide (MoS₂ ) has gained traction as a less hydrophobic material than graphene. However, experiments using 2D nanopores remain challenging due to the lack of scalable methods for high-quality freestanding membranes. Herein, a site-directed, scaled-up synthesis of MoS₂ membranes on predrilled nanoapertures on 4-inch wafer substrates with 75% yields is reported. Chemical vapor deposition (CVD), which introduces sulfur and molybdenum dioxide vapors across the sub-100 nm nanoapertures results in exclusive formation of freestanding membranes that seal the apertures. Nucleation and growth near the nanoaperture edges is followed by nanoaperture decoration with MoS₂ , which proceeds until a critical flake curvature is achieved, after which fully spanning freestanding membranes form. Intentional blocking of reagent flow through the apertures inhibits MoS₂ nucleation around the nanoapertures, promoting the formation of large-crystal monolayer MoS₂ membranes. The in situ grown membranes along with facile membrane wetting and nanopore formation using dielectric breakdown enables the recording of dsDNA translocation events at an unprecedentedly high 1 MHz bandwidth. The methods presented here are important steps toward the development of scalable single-layer membrane manufacture for 2D nanofluidics and nanopore applications.