Novel Magnetic-Bead-Assisted Sequential Extraction Method for Liquid Chromatography-Mass Spectrometry (MS)/MS of...

Sample preparation is the rate-limiting step in liquid chromatography-mass spectrometry (LC-MS)/MS-based clinical analysis when target analytes possess significantly different properties. Repeated solid-phase extraction (SPE) processes are typically required, resulting in low throughput and excessive consumption of labor, materials, and samples. In this study, we developed and validated a feasible and productive method to enrich target analytes with different properties during a single operation, while sufficiently removing matrix interferences to meet LC-MS/MS requirements. Gastrin determination was selected as the subject of this study. An automated magnetic-bead-assisted sequential extraction (MBASE) workflow was developed to simultaneously isolate nonsulfated gastrin-17 (G17ns), sulfated gastrin-17 (G17s), nonsulfated gastrin-34 (G34ns), and sulfated gastrin-34 (G34s) from human serum. It performs two different ion-exchange-based magnetic-bead extraction steps on one sample aliquot to produce one combined extract for LC-MS/MS analysis. When compared with the traditional SPE process, the MBASE workflow saves over 75% time and labor expenses as well as over 90% material cost, while providing even higher extraction efficiency. The MBASE LC-MS/MS method was validated as accurate and robust. Clinical sample test results demonstrated that the conventional chemiluminescence immunoassay method significantly under-estimated total gastrins in human serum, and the MBASE LC-MS/MS method could serve as an ideal tool to provide a comprehensive and accurate gastrin profile.