Polylactide-Based Films Incorporated with Berberine-Physicochemical and Antibacterial Properties

A series of new polymeric materials consisting of polylactide (PLA), polyethylene glycol (PEG) and berberine chloride (B) was evaluated. PEG was incorporated into the polymer matrix with the aim of obtaining a plasticizing effect, while berberine was added in order to obtain antibacterial properties in formed packaging materials. Materials were formed using the solvent-casting procedure. Fourier transform infrared spectroscopy and scanning electron microscopy were used so as to establish the structural changes resulting from the introduction of berberine. Thermogravimetry and differential scanning calorimetry were applied to study the thermal properties. Further, mechanical properties and differences in colour and transparency between the control sample and films containing berberine were also studied. The recorded data indicates that berberine formed a network on the surface of the PLA-based materials. Introduction of an active compound significantly improved thermal stability and greatly affected the Young's modulus values of the studied polymeric films. Moreover, it should be stressed that the addition of the studied active compound leads to an improvement of the antibacterial properties, resulting in a significant decrease in growth of E. coli and the S. aureus bacteria cultures.